Questions Problems Missing Parts Before Returning To The
1686137293
File Name: 7c17cb03-1d0b-4b87-975c-d83288e320da.pdf
File Size: 1.86 MB
File Type: Application/pdf
Last Modified: 3 years
Status: Available
Last checked: 7 days ago!
This Document Has Been Certified by a Professional
100% customizable
Language: English
We recommend downloading this file onto your computer
Summary
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS THANK YOUWe appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this exterior wall lantern. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Home Decorators Collection! Tools Required 4 Hardware Included.....................................4 Package Contents.......................................5 What is Covered........................................... 2 What is Not Covered .................................... 2 Specifications ............................................. 3 Selecting a Location .................................... 3 Planning Installation.................................... 3 : Carefully read and understand the information given in this manual before beginning the assembly and installation. Failure to do so could lead to electric shock, fire or other injuries which could be hazardous or even fatal
: Be sure the electricity to the wires you are working on is shut off. Either remove the fuse or turn the circuit off
: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
WHAT IS COVEREDThe manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of three (3)years from date of purchase. This warranty applies only to the original consumer and only to products used in normal use andservice. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair orreplacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse,abuse, accident, modifications, alterations, neglect or mishandling
WHAT IS NOT COVEREDThis warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not inaccordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result ofan accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty material orworkmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, asthis is considered normal wear and tear
The manufacturer does not warrant and specifically disclaims any warranty, whether express or implied, of fitness for a particularpurpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liablefor any consequential or incidental loss or damage, including but not limited to any labor / expense costs involved in thereplacement or repair of said product
Contact the Customer Service Team at 1-800-986-3460 or visit HOMEDEPOT.COM/HOMEDECORATORS
2 SPECIFICATIONS Motion Sensor Range Up to 30 ft. (varies with surrounding temperature) Sensor Detection Angle 180° Electrical Requirements 120 VAC, 60HZ Light Bulb 100W Incandescent light bulb or 14.5W LED light bulb Installation Height Ideally, 6.5 ft.±0.7 ft.(1.8 - 2.2 m) above the ground
Minimum to Maximum Outdoor Temperature -20°to 50°Celsius (-4°to 122°Fahrenheit)SELECTING A LOCATION □ The motion sensor’s maximum range is 180°detection width angle (Fig. 1), and is 30° detection down-angle (Fig
2). Mounting the fixture too high or in front of a sloped surface, such as an uphill walkway or driveway, may affect the motion sensor’s effectiveness
□ The motion sensor is less sensitive to movement toward or away from the motion sensor (Fig. 3) and more sensitive to movement across its coverage area (Fig. 4)
□ Select locations away from nighttime light sources, such as street lamps or other light fixtures. They may shine light onto the fixture’s photocell sensor (located in the motion sensor head). This light might trick the circuit to think it is daytime and not allow the fixture’s functions to operate
□ Select locations away from heat sources, such as heating vents, air conditioners, and heated swimming pools
□ Shade from a deep porch or an eave may not allow enough daylight to shine onto the photocell sensor and may trick the circuit to think it is nighttime, and subsequently cause the light to illuminate during the day
□ Motorized equipment, such as power tools, on the same electrical circuit may cause oscillations on the electrical line which might cause the fixture to malfunction
3 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance
PLANNING INSTALLATIONRead all instructions before assembly. Before starting installation of this fixture or removal of a previous fixture,disconnect the power by turning off the circuit breaker or by removing the fuse from the fuse box. To avoid damagingthis product, assemble it on a soft, non-abrasive surface such as carpet or cardboard
Keep your receipt and these instructions for proof of purchase
TOOLS REQUIRED Wire Safety Ladder Gloves Strippers Goggles Flathead Phillips Electrical Wire Caulk Screwdriver Screwdriver Tape CuttersHARDWARE INCLUDED Hardware not shown to actual size
Part Description Quantity AA Mounting Plate 1 BB Ground Screw 1 CC Mounting Screw (48 mm) 2 DD Outlet Box Screw (15 mm) 2 EE Wire Connector 3 4 PACKAGE CONTENTS Part Description Quantity A Wall Plate 1 B Mounting Point 1 C Washer 2 D Lock Nut 2 E Arm 1 F Finial 1 G Nipple (22 mm) 1 H Decorative Ball 1 I Top Cover 1 J Socket 1 K Fixture Frame 1 L Pan Screw (8 mm) 2 5 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance
1 Attaching the arm 2 Attaching the fixture frame to the top cover□ Screw the nipple (G) about 1/3 in. into the decorative □ Align the fixture frame (K) under the top cover (I)
ball (H). □ Use a Phillips screwdriver to screw the two pan□ Place the hole on the bottom of the arm (E) over the screws (L) into the holes on the top cover (I) to mounting point (B). secure the fixture frame (K)
□ Place the hole on the top of the arm (E) onto the nipple (G)
□ Screw the finial (F) onto the nipple (G) to secure the arm (E)
3 Attaching the mounting plate to the outlet box 4 Connecting the electrical wires □ Screw the ground screw (BB) into the mounting plate □ Wrap the ground wire from the fixture around the (AA). ground screw (BB) on the mounting plate (AA). Use a □ Screw the mounting screws (CC) into the mounting wire connector (EE) to connect the ground wire from plate (AA). the fixture to the ground wire from the outlet box
□ Use the outlet box screws (DD) to attach the □ Use a wire connector (EE) to connect the white wire mounting plate (AA) to the outlet box (not included). from the fixture to the white wire (neutral wire) from the outlet box
□ Make sure the threads of the mounting screws (CC) are facing out when the mounting plate (AA) is □ Use a wire connector (EE) to connect the black wire attached to the outlet box. from the fixture to the black wire (live wire) from the outlet box
□ Wrap the three wire connections with electrical tape for a more secure connection
□ Position the wires inside the outlet box
6 5 Securing the fixture to the wall 6 Applying caulk □ Align the mounting screws (CC) to protrude through the □ Caulk the space between the wall and the upper 3/4 holes on the wall plate (A). area of the wall plate (A) to prevent water seeping □ Place a washer (C) onto each of the mounting screws into the wall
(CC). □ Leave the bottom 1/4 area uncaulked for drainage of □ Screw the lock nuts (D) onto the mounting screws (CC) any water which might leak into the enclosure
to secure the fixture against the wall
7 Installing a light bulb □ Install a 100-Watt maximum, medium-base incandescent bulb (not included) into the socket (J)
You can use a LED energy-saving bulb that does not exceed 14.5 Watts (sold separately)
7 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance
Sensitivity DescriptionH High. In this setting, the sensitivity is the highest. The fixture will illuminate when the motion sensor detects motion within 3 - 30 ft from the motion sensor
M Medium. In this setting, the sensitivity is average. The fixture will illuminate when the motion sensor detects motion within 3 - 15 ft from the motion sensor
L Low. In this setting, the sensitivity is the lowest. The fixture will illuminate when the motion sensor detects motion within 3 - 5 ft from the motion sensor
Mode Timer Switch DescriptionStand-by Test, 2, or 6 This is the initial state. If you have turned off the power for a long period of time and then restore power to the fixture, the light will illuminate and remain illuminated for approximately 20 seconds regardless of motion. Then it enters the Auto Detection Mode or Test Mode based on the setting of the Timer switch
Auto 2 or 6 This is the normal motion detection mode. The motion sensor illuminates the lightDetection automatically after sensing movement in the coverage area at dusk and stays on as long as motion is detected. When motion stops, the light remains on for either 2 minutes or 6 minutes (as set on Timer Switch) and then automatically turns off
Test Test This mode allows you to adjust the sensitivity of the motion sensor to a desired level at dusk or dawn. When motion stops, the light will turn off in about 5 seconds
Manual N/A This mode allows you to keep the fixture illuminated for about 8 straight hours. TheOverride manual override mode only works at night (when the outside light intensity level is belowwith Auto 20 Lux). To activate the feature, turn the wall switch off then back on within 2 seconds
Reset After 8 hours, the fixture resets itself back to Auto Detection Mode
Dusk-to- D-D In this mode, the light turns on at dusk and off at dawn automatically, regardless of theDawn presence of motion. The “D-D” setting ensures lights are non-operational in daylight and only function at night. To activate, set the Timer switch to the “D-D” position
8 Clean the fixture with a soft, dry cloth
Do not use any cleaners with chemicals, solvents or hash abrasives
Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box
Problem Possible Cause Solution The wall switch or circuit breaker is off. Turn on a switch or circuit breaker
The light bulb may be dead. Test the light bulb in a known working light fixture
The light bulb is loose. Tighten the light bulb in the socket
In motion sensing mode, Incorrect or loose wire connections. Check the wire connections
the light does not turn on Too much sunlight is shining onto the photocell Relocate the fixture away from awhen there is motion. sensor in the early evening. western facing wall
Too much light is shining onto the photocell sensor Eliminate or turn off other light due to another light source, such as a street lamp source, block other light source from or other light fixture. shining onto photocell sensor, or relocate the fixture
Moving people or vehicles are below the view of the Relocate the fixture to a lower motion sensor, because the motion sensor is position or to a different location
mounted too high
In motion sensing mode, There is false triggering caused by a heat source, Eliminate the heat source or relocatethe light stays on such as a heater or dryer vent, or heated swimming the fixture
continuously. pool
Street or sidewalk traffic is triggering the motion Lower the sensitivity
The light comes on for no sensor
apparent reason. There is false triggering caused by a heat source, Eliminate the heat source or relocate such as a heater or dryer vent, or heated swimming the fixture
The light comes on during The fixture may be installed in a shaded area, such Relocate the fixture
the daytime or too early in as under a porch or eave, preventing daylight fromthe evening. shining onto the photocell sensor
9 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use
Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection de Lunes a Viernes entre 8 a.m. y 7 p.m., El Sábado entre 9 a.m. y 6 p.m., (hora del Este de EE. UU.) 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATOR GRACIAS POR TU COMPRA Agradecemos la confianza que ha tenido en Home Decorators Collection a traves de de la compra de este farola de paredpara exteriores. Nos esforzamos para continuamente crear productos de calidad diseñados para mejorar tu hogar. Visítanos por Internet para ver nuestra línea completa de productos disponibles para las necesidades de mejoras de tu hogar
Gracias por elegir Home Decorators Collection! Herraminentas Necesarias........................ 14 Hardware Incluido .................................... 14 Contenido del Paquete ............................. 15 Lo que esta Cubierto .................................. 12 Lo que (no) esta Cubierto ........................... 12Información de Seguridad Lea cuidadosamente y entienda la información dada en este manual antes de empezar el proceso de ensamble e instalación. Si falla en hacerlo, puede ocasionar un choque eléctrico, incendio u otros daños que pueden ser perjudiciales o fatales
Asegúrese de que la electricidad que llega a los cables con los que se encuentra trabajando estén apagados. Remueva el fusible o apague el interruptor
Cualquier cambio o modificación que no se encuentre expresamente aprobada por el proveedor responsable del cumplimiento puede revocar la autorización del usuario a utilizar el equipo
LO QUE ESTA CUBIERTOEl fabricante garantiza que esta lámpara no presentará defectos materiales o de fabricación por un período de tres (3) añosa partir de la fecha de compra. Esta garantía es válida sólo para el comprador original y sólo cubre los productos en uso yfunciones normales. Si se descubre algún defecto en este producto, la única obligación y solución exclusiva del fabricante,a criterio del mismo, será reparar o reemplazar el producto siempre y cuando el defecto no sea resultado de un mal uso,abuso, accidente, modificaciones, alteraciones,negligencia o manejo indebido
LO QUE (NO) ESTA CUBIERTOEsta garantía no cubre ningún producto instalado, configurado o usado incorrectamente sin seguir las instruccionesadjuntas al producto. Esta garantía no cubre fallas del producto a consecuencia de un accidente, mal uso, abuso,negligencia, modificaciones o instalaciones defectuosas, o cualquier otra falla no relacionada con defectos materiales o defabricación. Esta garantía no se aplica al acabado de ninguna parte del producto, como por ejemplo el de la superficie, ni aldeterioro por condiciones ambientales, ya que eso se considera un desgaste normal
El fabricante no garantiza y rechaza especialmente cualquier garantía, expresa o implícita, de idoneidad para un propósitoen particular, distinta de la garantía indicada aquí. El fabricante se exime específicamente de cualquier obligación y no esresponsable por daños o pérdidas directas o indirectas, lo que incluye cualquier costo de mano de obra o gastosrelacionados con el reemplazo o reparación de dicho producto
Comunícate con el Equipo de Servicio al Cliente al 1-800-986-3460 o visita HOMEDEPOT.COM/HOMEDECORATORS
Thank you for choosing Home Decorators Collection! Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, …
Documemt Updated
Popular Download
Frequently Asked Questions
What is the problem of missing parts?
Introduction 2 The company identifies the problem of missing parts at the time of production as giving rise to: waste of material, waste of time, financial waste and reduced delivery precision. The company wants to be able to effectively locate stored parts.
What happens when parts are not available?
In such instances when parts will not be available when needed, additional planning effort is required. This can for example lead to reprioritizing crucial missing parts and setting them earlier in the production queue to prevent unnecessary waiting time when for example all other parts are ready to be assembled.
What if i have trouble finding the parts i am looking for?
If you have trouble locating the parts you are looking for, call us or contact us using the "Contact Us" link in the left hand menu near the top of the page and we will help you find it.
What should i do if a part is missing?
Should a part be missing, please contact Overstock within 30 days from the delivery date or as soon as possible. Have the following information ready and available to help us achieve the best resolution for your request: Details of why parts are needed Part number needed (found in the assembly guide or package contents)