At 8882636973 or 1 3 101011 tips for first time use (361.03 KB)

File Name: setup-guide-temp-stick-th.pdf

File Size: 361.03 KB

File Type: Application/pdf

Last Modified: 2 years

Status: Available

Last checked: 3 days ago!

This Document Has Been Certified by a Professional

100% customizable

Language: English

We recommend downloading this file onto your computer

Summary

3-Step Quick Start
Important: The setup process must be completed Need Help? If you are having difficulties with setup please
on the WiFi network in which it will be used. remove the batteries and contact our friendly support team
at 888.263.6973 or [email protected]
Open your web browser and in the url
1 3
Install the batteries into your Temp
address bar enter 10.10.1.1 and press
Stick sensor

Enter or Go. TIPS FOR FIRST TIME USE
CALIBRATION & FIRST TIME USE:
Important: The sensor will calibrate during the first
hour of use. Initial readings will be off by +/- 10° F until
calibration is complete (1 hour). The blue light will come
on for a couple seconds each time the sensor takes a
reading (once an hour by default)

FREEZER USAGE:
The sensor temperature range is between -40° to 125°
F. Lithium batteries perform best in extremely cold or
The LED light on your Temp Stick hot conditions where alkaline batteries typically cease to
will start blinking indicating it is in function. 2x AA (1.5V) Lithium batteries are recommended
Setup Mode. Your browser will now load the Temp Stick setup for temperatures down to -40°

page. Follow the onscreen instructions to select a
WiFi network and complete the setup. When setup is
complete the blue light will turn off

LOGGING IN TO YOUR SENSOR
Go to the WiFi settings of your Before you can log into your sensor you must
2
complete the initial sensor setup and account
smartphone, tablet or computer and
activation. Please refer to the 3-Step Quick Start
connect to the WiFi network named Guide

Sensor Setup

Go to tempstick.com and click the sensor login
Note: The Sensor Setup network name will also link at the top of the page

include your sensor ID number

- Or -
For example: “Sensor Setup 1234567”
Download the free App at the App Store or
Google Play. You can find them by scanning
the QR codes or by searching for Temp Stick

Some app versions may still be pending

CHANGING YOUR WIFI NETWORK / RESET
Your sensor ID number To reset your sensor into setup mode follow these steps:
1. Pull out only one battery and wait 10 seconds

2. Insert that battery back into the sensor 6 times. On
the 6th time leave the battery in the sensor

3. The light should flash a couple times and return to a blinking
Note: This network provides access to the Temp Stick setup state indicating you are back in setup mode. You can now
page only. If you see an “Unsecured Network” or “No Internet follow the 3-step quick start guide again to assign the
Connection” message, please ignore it and connect anyway. sensor to new WiFi network

BATTERY OPTIONS SPECIFICATIONS
Power Source: Two (2) AA 1.5V alkaline batteries
Alkaline Batteries (Included)
Power Usage: 1 year battery life with typical usage
Your Temp Stick sensor comes with two 1.5V Temperature Range: -40°F to 125°F
AA alkaline batteries

Quick Start Guide
Humidity Range: 0% to 100% (relative humidity)
Average battery life expectancy with default Dimensions: 3.5"(L) x 1.5"(W) x 1.25"(H)
settings is up to 1 year

Wi-Fi Frequency: 2.4Ghz
Communications: The Temp Stick operates as a client device
Lithium Batteries: using industry-standard Wi-Fi® (8.2.11G)
Recommended for Extreme heat and freezer
applications:
ONE YEAR LIMITED WARRANTY
Lithium batteries perform even in the most
extreme temperatures, making lithium
This product is warranted to be free of defects in material and
batteries perfect for extremely cold or hot workmanship for one year from date of activation

conditions where alkaline batteries typically
cease to function. Use Lithium batteries Ideal Sciences will, at its election and as the purchaser’s or end user’s
sole and exclusive remedy for any breach of the limited warranty set
(2 AA x 1.5v) at temperatures down to -40°
forth above, repair or replace this product if a defect in material or
workmanship is identified and communicated to Ideal Sciences within
the one-year period described above. Ideal Sciences is not responsible
for removal or re-installation costs. This warranty is not valid in cases
MOUNTING WITH VELCRO STRIP where damage to this product is the result or arises out of misuse, abuse,
incorrect repair or improper wiring or installation

To notify Ideal Sciences of any breach of the foregoing limited warranty
Adhere the sticky side of the Velcro strip
and to obtain warranty service, contact Ideal Sciences Customer Support powered by Ideal Sciences
to the flat surface on the back side of by email to [email protected] or by calling 888-263-6973, to obtain
your Temp Stick sensor. Adhere the a Return Materials Authorization (“RMA”) number and instructions for
other piece of Velcro to the location returning your product

where you want your sensor installed. IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND Before you begin, you will need
FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY DISCLAIMED,
EXCEPT WHERE SUCH DISCLAIMER IS PROHIBITED BY APPLICABLE LAW

IDEAL SCIENCES AND/OR THE SELLER DISCLAIM(S) ANY AND ALL LIABILITY
FOR SPECIAL, INCIDENTAL AND CONSEQUENTIAL DAMAGE IN ANY WAY  One Temp Stick Sensor
FCC ASSOCIATED WITH OR RELATED TO THE PURCHASE, INSTALLATION AND/
OR USE OF THIS PRODUCT.  Two AA batteries (included)
FCC ID: 2AC7Z-ESPWROOM02
This device complies with Part 15 of the FCC Rules. Operation is subject  A smartphone, tablet or pc with Wi-Fi
to the following two conditions: (1) this device may not cause harmful LIMITATION OF DAMAGES; RELEASE capability
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation

TO THE EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE
 Your wireless (Wi-Fi) network name and
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These COMPANY, ITS AFFILIATES, DIRECTORS, OR EMPLOYEES, OR ITS LICENSORS password for sensor setup
limits are designed to provide reasonable protection against harmful OR PARTNERS, BE LIABLE TO YOU FOR ANY LOSS OF PROFITS, USE, OR
interference in a residential installation. This equipment generates, uses, DATA, OR FOR ANY INCIDENTAL, INDIRECT, SPECIAL, CONSEQUENTIAL OR
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
EXEMPLARY DAMAGES, HOWEVER ARISING, THAT RESULT FROM (A) THE Need Assistance?
USE, DISCLOSURE, OR DISPLAY OF YOUR USER CONTENT; (B) YOUR USE
radio communications. OR INABILITY TO USE THE SERVICE; (C) THE SERVICE GENERALLY OR THE
IMPORTANT! Changes or modifications not expressly approved by Ideal SOFTWARE OR SYSTEMS THAT MAKE THE SERVICE AVAILABLE; OR (D) ANY
Support & Sales: 888.263.6973
Sciences void the user’s authority to operate the equipment. OTHER INTERACTIONS WITH THE COMPANY OR ANY OTHER USER OF THE
FCC Radiation Exposure Statement
SERVICE, WHETHER BASED ON WARRANTY, CONTRACT, TORT (INCLUDING Email: [email protected]
NEGLIGENCE) OR ANY OTHER LEGAL THEORY, AND WHETHER OR NOT
This equipment complies with FCC radiation exposure limits set forth for THE COMPANY HAS BEEN INFORMED OF THE POSSIBILITY OF SUCH Website: tempstick.com/support
an uncontrolled environment. This equipment should be installed and DAMAGE, AND EVEN IF A REMEDY SET FORTH HEREIN IS FOUND TO HAVE
operated with minimum distance 20cm between the radiator and your FAILED OF ITS ESSENTIAL PURPOSE. SOME JURISDICTIONS LIMIT OR DO
body
NOT PERMIT DISCLAIMERS OF LIABILITY, SO THIS PROVISION MAY NOT
The Temp Stick Sensor complies with relevant standards established
by the following regulatory bodies: Federal Communications
APPLY TO YOU. Ideal Sciences tm
smart sensor technology Made in the USA
Commission (FCC)

The QR codes or by searching for Temp Stick. Some app versions may still be pending. To reset your sensor into setup mode follow these steps: 1. Pull out only one battery and wait 10 …